Fiberglass Chopped Strand Mat
|
|
|
| E Glass Chopped Strand Mat | |
| Introduction: E-glass chopped strand mat is made from fiberglass strands chopped to length and bonded together with powder binder.Chopped strand mat is used primarily for hand lay-up processes,filament winding and press molding of FRP products.Typical products in cluds bathroom accessories,pipe,buildin materials,automobiles,furnitures and other FRP products. | | Technical specifications R2O Content: <0.8%Filament diameter:11μm-13μmMoisture:≤0.2%Loss on Ignition:2%-9%Binder Type Powder or EmulisionCompatible Resin: PolyesterStyrene Solubility <50seconds | | | Product Characteristics: 1.Quick wet-out with resins,degassing properties,easily fills mold and conforms to complex shapes.2.Fiber and binder evenly distributed without defects of fuzz,oil spot,and blots.3.High mechanical strength and high wet strength retention. | | Product specification: | Product code | Width(mm) | Compatible resin | Breaking Strength(N/150mm) | | EMC200 EMC225 EMC300 EMC450 EMC600 EMC900 | ≤3300 ≤3300 ≤3300 ≤3300 ≤3300 ≤3300 | EP/UP EP/UP EP/UP EP/UP EP/UP EP/UP | 35 35 40 60 60 70 |
*Special:products are according to customer's requirements. Individual and bulk packaging:Individual packaging:each roll is wound on a cardboard tube(exterior diameter 76mm)and protected by a plastic bag,then be put into a carton.Each standard pallet with the size of 1280mm×960mm×120mm contains 12 of rolls with the packaging type of 4x3.Static stacking of the pallets is possible up to one high. Storage:The EMC should be stored dry and in its original packaging.The best conditions are temperature between 10 to 35 and at a relative humidity between 35% to 55%. |
|
|
Fiberglass Emulsion Bonded Chopped Strand Mat
